Filter | OEM PN | Rapco PN | Description | Recommended Replacement |
PN | Buy |
---|---|---|---|---|---|---|
![]() | 1J4-7, 2J4-7 | RA2J4-7 | Inline Air Filter. Sealed Stainless Steel canister filter with two 5/8” hose fittings, overall length 5-1/2” x 3-1/4” diam. | 500 hours/ 1 year | 10-23830 | $62.75 |
![]() | 1J7-1 | RA1J7-1 | Central Air Filter Assembly For vacuum systems. Metal manifold with two 3/8” hose fittings and replaceable RA-D9-18-1 filter element, overall length 3-1/4”x2-7/8” diam. | 500 hours/ 1 year | 10-23840 | $49.50 |
![]() | B3-5-1 | RA-B3-5-1 | Garter Filter Element. Polyurethane foam, 1” long x 1-3/4” diam. For use on Airborne 133 & 2H3 series regulators and 1J1 series filter assemblies. | 100 hours/ 1 year | 10-23850 | $2.95 |
![]() | D9-14-5 | RA-D-9-14-5 | Inlet Air Filter Element. Pleated filter, screen with bonded metal cap and rubber seal. 2-5/8” long x 2-5/16 diam. For use with Airborne 1J2 filter assembles (Except 1J2-2) | 100 hours/ 1 year | 10-23870 | $22.95 |
![]() | D9-14-3 | RA-D9-14-3 | Inlet Air Filter Element. Pleated filter, screen with bonded metal cap and rubber seal. 2-3/16” long x 2-15/16 diam. For use with Airborne 1J2-2 filter assembles | 100 hours/ 1 year | 10-23860 | $23.50 |
![]() | D9-18-1 | RA-D9-18-1 | Central Air Filter Element. Pleated filter, screen with bonded rubber end seals. 3-1/4” long x 2-7/8 diam. For use with Airborne 1J7-1 filter assembles, for vacuum systems | 500 hours/ 1 year | 10-23880 | $22.85 |
![]() | 1J4-4, 2J4-4, AA2J4-4, AA1J4-4 | RA2J4-4 | Inline Air Filter. Sealed Stainless Steel canister filter with two 1/2” hose fittings, overall length 5” x 3-1/4” diam. | 500 hours/ 1 year | 10-23810 | $62.75 |
![]() | 1J4-6, 2J4-6, AA2J4-6, AA1J4-6 | RA2J4-6 | Inline Air Filter. Sealed Stainless Steel canister filter with two 5/8” hose fittings, overall length 6-3/4” x 3-1/4” diam. | 500 hours/ 1 year | 10-23820 | $62.75 |
![]() | 1J10-1 | RA1J10-1 | Central Air Filter Assembly. Pleated filter, screen with rubber ends, two 3/8” hose fittings, overall length 5-1/4” x 3” diam. Complete filter assembly replacement for vacuum systems. | 500 hours/ 1 year | 10-00287 | $47.99 |
![]() | 101-524009-0163, 101-524009-0161, 101-524009-91 | RA101-524009-0163 | Rudder Boost Filter. Sealed Stainless Steel canister filter with drain hole. Two 5/8” hose fittings, overall length 5-1/2” x 3-1/4” diam. | -- | 05-15253 | $69.95 |
Rapco FAA-PMA approved filter replacements for Airborne assemblies. Destructive contamination abounds within an aircraft environment. Without proper filtration, system dirt and dust from the cabin and cigarette smoke will take its toll. This results in replacement of expensive gyro instruments & other components.
Your operating costs can be significantly reduced when filters are changed on a scheduled basis. RAPCO filters are constructed to the highest industry standards. They utilize a 0.3 micron filtration media which provides superior filtration without undue air flow restriction. As a RAPCO distributor, we offers these replacement filters at exceptionally low prices. |
It does what its supposed to do. There is nothing to write about
RAPCO FILTER RAB3-5-1
RAPCO FILTER RA1J7-1 ASSY
RAPCO FILTER RAB3-5-1
RAPCO FILTER RAB3-5-1
RAPCO FILTER RAD9-14-5
RAPCO FILTER RAB3-5-1
Works as expected.
RAPCO FILTER RAD9-18-1
Works as expected.
RAPCO FILTER RAB3-5-1
I have installed this as a replacement to an earlier one. The airflow in my vacuum system is much improved as a result!
RAPCO FILTER RAD9-18-1
I have been using these inlet filters on the vacuum system in my Cessna 170B for a long time and have been well pleased with they. Highly recommended.
RAPCO FILTER RAD9-14-5
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, this does come with the filter unit.
The filter assembly mounts in the aircraft, it is mounted with the bolt going through the firewall with a nut on the other side securing it.