EVERYTHING FOR PLANES AND PILOTS SINCE 1965 | 877-4-SPRUCE

AeroLEDs Sunbeacon II Beacon Light TSO For Certified Aircraft

Select Color:
Red White
Select Voltage:
12V24V
Quantity
Add to Wishlist

Overview

The compact SunBeacon II is a direct replacement for the standard beacon. It is available in red or white, and in 12V or 24V. It is TSO C-96a Class II approved for white, TSO-C96a Class I and Class III approved for red.

Specifications

  • Beacon Average Current: 1.2A at 14V, 0.6A at 28V
  • Beacon Peak Current: 4.4A at 14V, 8.8A at 28V for 0.2 seconds
  • Accessories
  • Frequently Purchased With
  • Customers Also Viewed
  • Related Items

Reviews

Very bright replacement for my old Grimes beacon! I had to make a plate to cover the hole from the Grimes, and installed this on the plate.

Peter V Verified Purchase

AEROLEDS SUNBEACON II RED FAA TSO 24V

November 22, 2023

Much brither than any other beacon.Easy to install.Together with the holder fits perfect on Pa28, no additional hols to make

Cs C Verified Purchase

AEROLEDS SUNBEACON II RED FAA TSO 12V

July 17, 2023

Super bright. Just don’t forget to purchase the mounting base.

Alaska A Verified Purchase

AEROLEDS SUNBEACON II RED FAA TSO 24V

January 18, 2023

Great product Ive used these on several aircraft. Best in its class by far!

Point T Verified Purchase

AEROLEDS SUNBEACON II RED FAA TSO 24V

September 29, 2022

5starr

Jims G Verified Purchase

AEROLEDS SUNBEACON II RED FAA TSO 12V

July 15, 2022

Perfect little beacon, unbelievably bright and perfect for our TriPacer

Jeffrey Verified Purchase

AEROLEDS SUNBEACON II RED FAA TSO 12V

April 23, 2022

Works great and installation was a breeze.

Contrail A Verified Purchase

AEROLEDS SUNBEACON II RED FAA TSO 12V

October 5, 2021

W R Verified Purchase

AEROLEDS SUNBEACON II RED FAA TSO 12V

August 5, 2021

All good.

Scott N Verified Purchase

AEROLEDS SUNBEACON II RED FAA TSO 12V

July 2, 2021

very bright, easily seen at a distance in daylight. Works well with the Aerolight wingtip strobes using a sync wire.

R B
March 23, 2021

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What are the dimensions of this AeroLEDS SunBeacon B LED / Red light?

Per the supplier: The dimensions are 2.5" L x 2.5" W x 1.6" H.

Q: What is the warranty of the AeroLEDs Sunbeacon II lights?

5 year warranty.

Q: Does the SunBeacon II come with mounting hardware to mount on the top or bottom of the aircraft or do you need to order the adapter?

The installation instructions indicate the mouning bracket is sold separately.

Q: I have an existing Grimes rotating beacon. What adapter do I need to replace it with a Sunbeacon II?

Per AeroLEDs: the Sunbeacon II requires an adapter which is part number 11-13537

Q: What is the flashing interval on the AeroLEDs Sunbeacon II?

The flash rate is 41 flashes per minute.

Q: Does this require an STC?

No as it has a TSO approval. It will just need to be installed and signed off by an A&P mechanic.

Q: Will the AeroLEDs Sunbeacon II fit on a PA28-140? Will I need the adapter plate?

The vendor recommends using the SunBeacon II kit mount 01-1096 (PN 11-13537).

Q: Does the sun beacon II need an adapter for a Bonanza F33A, year 1978 ?

Yes, you will want to purchase adapter part number 11-17387.

Q: Is the specified Peak Current correct? I assume its 8.8A@14V and 4.4@28V

Peak of 9.2A at 14V | Peak of 4.6A at 28V

Q: Which adapter (if any) is required for a 1974 Cessna 172M?

You would need the SunBeacon II Twist mount PN 01-1096 (our part number 11-13537.)

View in Catalog

View Image View in Catalog