Designed for mounting in 3/4" O.D. x .049" wall aluminum tubing (not furnished). Machined from solid aluminum. Includes Polyethylene hose fitting for 1/4" I.D. Made in USA |
PITOT TUBE 15170
Comes with no instructions or suggestions of how to install it
PITOT TUBE 15170
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The threaded holes are meant to be used for screwing the pitot tube to the airplanes tubing. If you are clamping the pitot tubes on, the holes should be blocked.
Yes, as long as there is no cosmetic damage the pitot tube may be returned within 30 days for a full refund.
Approx 6 inches
There are only 2 threads on this unit. One is a 6-32 set screw and the port is a 1/8-27NPT.
Yes, this should work fine in a light sport or ultralight.
These are used to measure things such as airspeed, angle of attack. They will have one hole for the tubing and other two holes for the readings.
Approx 2 lbs.